Extensions · Loft conversions · New builds

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

MoreSpace Sussex Ltd

Rsj in Purley

We supply and install RSJs in accordance with structural engineer's calculations, ensuring complete building control sign-off as part of our work.

  • On-time, on-budget delivery
  • Clear communication and a fast response
  • One contractor from groundworks to the keys

See our work in person Visit a finished project and talk to past clients

Request Your Free Consultation

Who Needs Structural Steel Work

Opening Up Ground Floor

If you're looking to knock through a load-bearing wall to create an open-plan kitchen and living space, an RSJ is essential for structural support in Purley. Without proper steelwork, Building Control will not approve the removal, and that's for a good reason - the wall holds an important load. An RSJ takes on this responsibility, transferring the weight from above across the new opening. We size and install the beam based on the structural engineer's specifications to ensure everything is done correctly from the beginning.

Connecting an Extension

When a new extension joins an existing property, the point of connection often requires an RSJ to bridge the gap and effectively tie the two structures together. This scenario is especially common in single-storey rear and side return extensions, where the original back wall is removed fully or partially. The RSJ supports the load overhead while the new area remains open below and receives approval from Building Control before any finishing touches are applied. Getting this stage right is vital to avoid future cracks and movement.

Loft and Upper Floor Work

RSJ installation is also integral in many loft conversions, where structural steel is necessary to support new floor joists and redistribute the roof loads. During a hip to gable or dormer conversion, altering the roof structure significantly often requires an RSJ or steel frame to manage the new loads safely. We adhere to the structural engineer's specifications throughout, installing temporary propping while the beam is set up and ensuring Building Control inspections are conducted at appropriate phases. Although the RSJ will be hidden once the project concludes, its structural integrity is crucial to the success of the entire conversion.

Contemporary kitchen extension with dark cabinetry, white counters, and full-width patio doors opening to garden

Protecting Utilities Before Knocking

Modern kitchen extension with open-plan dining, black cabinetry, and garden doors

Hidden Pipework Checks

Old pipes sit behind masonry. When fitting an Rsj in Purley, we frequently find live gas lines running directly through the masonry course where the steel needs to rest. We isolate these runs first. An overlooked central heating return pipe or a rogue ring main cable can turn an afternoon lift into an emergency call-out for an electrician.

Ceiling Cavity Routing

Cables need new pathways. Before sliding the beam onto its padstones, existing electrical feeds serving upper floors must be diverted around the flanges rather than squeezed against raw iron edges. If a copper supply pipe crosses the structural opening, we box out or reroute the plumbing entirely. Plasterboard cannot safely hide pinched domestic services beneath heavy metal. Moisture from unlagged cold lines can drip quietly onto steel flanges and degrade the surrounding plaster over several seasons.

Advantages of One Team Throughout

  • No Coordination Gaps

    When our team handles the RSJ installation and continues with the rest of the project, nothing slips through the cracks. The structural work smoothly transitions to the next stage without needing to wait for another contractor to complete their part.

  • Structural Work in Context

    We understand how the RSJ fits into the broader project - whether it's an extension, a loft conversion, or opening the ground floor. This means positioning the beam accurately from the outset, with the remaining construction planned around it.

  • Building Control Handled

    The installation of RSJs requires Building Control sign-off before the beam is concealed, and we take care of that aspect throughout the job. There is clarity about who organizes the inspection and what procedures follow if adjustments are necessary.

  • Temporary Propping Done Right

    Proper temporary propping is crucial during RSJ installation; doing it incorrectly jeopardizes the structure. Because we manage the entire sequence of work, the propping remains in place for as long as needed, without any pressure from other trades waiting to get started.

  • Making Good Included

    Once the RSJ has been installed and approved, our team takes care of the wall openings, plasterwork, and finishes to restore the area. You won’t have to deal with a structurally sound beam and an unfinished look requiring resolution by another party.

Rendered single-storey extension with large black-framed windows, soffit downlights and a landscaped patio

Preparing Your Living Area Properly

Kitchen extension with modern open-plan design, dark island, dining table, and sliding glass doors to garden

Clearing Out Furniture

Dust penetrates every gap. Masonry demolition throws dense brick particulate across hallways. Moving sideboards, sofas, and floor coverings completely out of adjacent rooms prevents gritty debris from ruining polished timber or upholstery. For homeowners arranging an Rsj in Purley, creating a clear corridor from the front driveway right through to the workspace prevents accidental scuffs on narrow doorframes.

Sealing Off Interior Rooms

Taping doors makes sense. Heavy polythene sheeting taped across interior thresholds keeps fine mortar dust from migrating into upper bedrooms and soft furnishings. When old internal walls come down, vibrations travel straight up the studwork into upstairs wardrobes. We tell clients to lift delicate ceramics and glassware down from nearby display shelves beforehand to prevent unexpected breakages while masonry is being unpicked downstairs.

Process From Calculations to Completion

  1. Structural Engineer Calculations

    We collaborate with a structural engineer right from the start to determine the correct RSJ size, specifications, and bearing points based on your project's span and load needs in Purley.

  2. Temporary Propping Installed

    Before touching any masonry, we set up temporary propping to safely carry the load during the work. This ensures the structure above is protected while the RSJ installation is underway.

  3. Opening Up and Beam Placement

    We carefully remove the masonry to create the new opening, then lift and place the RSJ onto its designated padstones or steel columns. The beam is positioned precisely according to the engineer's plans, with no compromises on bearing lengths or levels.

  4. Building Control Inspection

    We arrange the necessary Building Control inspection during the structural phase, before covering anything up. The RSJ and its supports are approved on-site, providing you with a record that all work meets Building Regulations.

  5. Making Good and Finishing

    Once we receive sign-off for the RSJ, we restore the surrounding masonry, plasterwork, and finishes. The structural steel is concealed within the building's structure, and the area is left prepared for the next phase of the project.

Seasonal Weather Factors During Heavy Work

Cold Weather Mortar

Freezing conditions delay curing. Padstones require solid, set mortar before they can bear any downward steel pressure safely. If frost hits the masonry beds during an installation of an Rsj in Purley, the mix simply turns brittle and fails under load. We monitor night temperatures closely. Cold air requires slower curing schedules, while sudden rain calls for tarpaulins pinned tightly over exposed external masonry pockets.

Managing Wet Site Ground

Mud slows down deliveries. Hauling several hundredweight of raw steel across a sodden turf lawn churns garden soil into slurry and creates real slipping risks for the team carrying the weight. Laying heavy plywood boards along the access route gives firm footing for manually walking beams through rear garden gates. Ground conditions dictate whether a compact lifting hoist can roll securely over external patios without cracking fragile stone paving slabs.

Modern kitchen extension with fitted gray cabinets, island and open dining area

Years of Structural Building Experience

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

Structural Steel Knowledge

With over 35 years in the business, we have installed numerous RSJs throughout Sussex - from house extensions and loft conversions to open-plan redesigns and new constructions. Each RSJ installation follows precise structural engineer calculations to suit the required size and load it must handle, as keeping these adjustments accurate prevents issues that may appear years later, such as cracks and sagging.

Temporary Propping Done Right

Before placing any RSJ, the existing structure must be carefully supported throughout the process. We install temporary propping to manage the load while the beam is positioned and secured, ensuring that the propping remains intact until the RSJ is completely settled and the structure is stable. We do not rush this step; it demands careful attention. Building Control inspects the setup before anything is concealed, and we include this sign-off as a standard task.

One Team, Full Scope

As soon as the RSJ is set and signed off, we complete all related finishing work ourselves - patching, plastering, and tidying the area to a neat finish. There’s no transition to another team and no gaps between the structural work and the subsequent stages. Whether the RSJ is creating a structural opening in a load-bearing wall or opening up a ground floor for an extension, we manage the entire process from start to finish.

Let's Talk About Your Structural Project

Done Right From the Start

If you are planning to open your ground floor, remove a load-bearing wall, or attach a new extension to your existing dwelling, RSJ installation must be approached with care. Every RSJ we install is sized and specified according to structural engineer calculations even before we set up any temporary supports. Throughout the process, we maintain full temporary propping, ensuring the structure above remains solid at every step.

One Team, No Gaps

Since we handle the structural work along with the remaining aspects of the build, there’s no delay waiting for a separate steel contractor before progress can continue. Managing the RSJ installation, coordinating with Building Control, and finishing all surrounding work after the beam is approved is part of our process. With 35 years of know-how, we understand exactly what's required to perform structural work properly and to keep your project moving forward.

Local contact

Contact in Purley

We operate in Purley and the surrounding areas, providing expert RSJ installation services. Reach out for a free estimate or to schedule a site visit; we're just 30 miles from Haywards Heath.

approx. 30 milesDistance from our base · Haywards Heath

Call us+44 7351 026409Email usmorespacesussex@yahoo.com

We serve your areaPurley and the surroundings

The Google map loads after you accept marketing cookies.

Request Your Free Consultation

What Clients Say

01

“Very satisfied with the service! Excellent communication, clean workmanship, and everything completed professionally. Highly recommended!”

Maksymilian Mazur

Review from Google

What we build

Our Building Services

Project Results

Builders at MoreSpace Sussex Ltd deliver finished, practical living spaces tailored to each client's real needs.

Where We Operate

Builders from MoreSpace Sussex Ltd operate within a 40 km radius of Haywards Heath for all projects, from loft conversions and extensions to complete new builds.

Frequently asked questions - Rsj