Extensions · Loft conversions · New builds

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

MoreSpace Sussex Ltd

Rsj in Crawley

We provide and fit RSJs according to structural engineer's specifications, ensuring all building control approvals are completed.

  • On-time, on-budget delivery
  • Clear communication and a fast response
  • One contractor from groundworks to the keys

See our work in person Visit a finished project and talk to past clients

Request Your Free Consultation

Identifying Structural Steel Requirements

Creating Open Spaces on the Ground Floor

To create an open-plan kitchen and living area by removing a load-bearing wall, an RSJ in Crawley is essential. Taking down any load-bearing structure without adequate steel support will not pass Building Control, and it’s understandable why; that wall has a critical role. An RSJ substitutes that wall, supporting the load above the new opening, and we install the beam precisely based on the structural engineer's calculations, ensuring everything is correct from the outset.

Integrating New Extensions

When adding an extension to your home, we often require an RSJ to ensure a proper connection between the new and existing structures. This is especially true for single-storey rear or side return extensions in Crawley, where the original walls might be partially or fully removed. The RSJ carries the overhead load while allowing for an expanded space below. This entire connection is verified by Building Control before any plasterwork is applied, as proper installation is vital in preventing issues down the road.

Work on Lofts and Upper Floors

For many loft conversions, installing an RSJ is a routine task, as structural steel is needed to support new floor joists and redistribute roof loads. In projects like hip to gable or dormer conversions, the existing roof’s structure is significantly altered, necessitating the installation of an RSJ or steel framework to safely manage the new loads. We align our work with the structural engineer’s specifications during the entire process, using temporary supports while the beam is installed and ensuring Building Control inspections are completed at appropriate stages. Although the RSJ itself is often concealed after finishing, it plays a critical role in maintaining the integrity of the entire conversion.

Contemporary kitchen extension with dark cabinetry, white counters, and full-width patio doors opening to garden

Protecting Existing House Systems

Kitchen extension with modern open-plan design, dark island, dining table, and sliding glass doors to garden

Rerouting Hidden Cables

Old brickwork hides live wires. When installing an Rsj in Crawley, trades often uncover forgotten electrical circuits running directly through internal partitions. We isolate the consumer unit before any masonry is disturbed, then trace each circuit back to avoid accidental cuts that leave rooms dark. A misplaced drill bit can puncture hidden wiring or sever an earth line. Electricians must clip new cables safely away from the metal flange.

Plumbing Pipe Adjustments

Copper feeds sweat inside cavities. Copper supply lines or plastic waste pipes usually sit inside old stud partitions, requiring careful rerouting under floorboards long before our team lifts any steel beam into position. You cannot simply notch an iron girder to squeeze a pipe past, meaning your central heating and cold supply lines will need alternative routes around the ceiling junction. Radiators get drained. Then the pipe runs drop down through alternative stud partitions.

Benefits of a Unified Approach

  • Eliminating Coordination Issues

    When our team handles both the RSJ installation and the rest of the building work, nothing falls through the cracks. This allows for a smooth transition to the next phase without delays from another contractor.

  • Understanding the Structural Context

    We have a complete understanding of how the RSJ integrates into the overall project, whether it involves a house extension, a loft conversion, or opening up the ground floor area. This awareness ensures the beam is placed correctly from the beginning, with subsequent construction efforts tailored around it.

  • Managing Building Control Approvals

    Installing an RSJ requires securing building control approvals before the beam can be concealed. We take care of that process, eliminating any uncertainty regarding who handles inspections or what adjustments may be necessary.

  • Proper Temporary Propping Procedures

    Correctly implemented temporary propping is crucial throughout the RSJ installation. Missteps can jeopardize the entire structure. Our comprehensive approach ensures that supports are in place for the necessary duration, with no rush from other trades involved.

  • Repairs and Finishes Included

    After the RSJ is installed and approved, our team will take care of the wall openings, plastering, and finishing touches. You won't be left with a sound structure and rough appearances that need another contractor to rectify.

Rendered single-storey extension with large black-framed windows, soffit downlights and a landscaped patio

Addressing Structural Challenges Effectively

Modern kitchen extension with open-plan dining, black cabinetry, and garden doors

Removing Load-Bearing Walls

When dismantling a ground-floor wall to connect an extension or to establish an open-plan area, an RSJ is the key to maintaining structural support overhead. Every RSJ we install in Crawley is sized according to the calculations provided by a structural engineer, alongside proper temporary supports during the installation process. Building Control inspects every RSJ before any surfaces are concealed, leaving no doubt about what’s behind the finishing.

Linking Extensions to the Original Structure

Connecting an extension to your existing house almost always necessitates structural steelwork, and ensuring that this connection is solid is vital for the longevity of the build. We manage the entire process-from propping, through RSJ installations, to restoring the masonry and finishes-so the combination of old and new structures is robust and visually appealing. With decades of experience across structural projects throughout Sussex, we have the knowledge required to meet these junctions' demands effectively.

Our Process: From Plans to Completion

  1. Calculating Steel Requirements

    We collaborate with a structural engineer right from the beginning to identify the appropriate RSJ size, specifications, and bearing points depending on the project's specific load requirements.

  2. Setting Up Temporary Supports

    Before any removal begins, we establish temporary propping to bear loads securely throughout the project. This guarantees both the safety of the upper structure and the job site as the RSJ is installed.

  3. Creating Openings and Placing Beams

    We meticulously remove masonry to form the new opening and then raise and position the RSJ on its padstones or steel columns at either end. The beam placement adheres strictly to the engineer's specifications, avoiding shortcuts regarding bearing lengths or levels.

  4. Coordinating Building Control Inspections

    We schedule Building Control inspections during the structural phase, prior to any enclosure or plastering. The RSJ and its supports receive on-site approval, creating a clear record that the work complies with Building Regulations.

  5. Restoring Finishes Once Approved

    After the RSJ receives approval, we restore the surrounding masonry, plastering, and any finishes impacted by the installation. The steel structure integrates into the building’s fabric, allowing the space to be ready for the next construction phase.

Preparing Your Living Space Properly

Clearing Access Routes

Heavy steel demands clear ground. Delivering an Rsj into Crawley homes means moving wheelbarrows, trestles, and thick sections through front hallways without dinging skirtings or tracking crushed mortar into private bedrooms. We ask owners to roll back entryway carpets and shift freestanding furniture into unaffected rooms. Plaster dust penetrates even closed wardrobes. Polyethylene sheeting taped across internal doorways creates a practical barrier.

Protecting Finished Floors

Dropped mortar damages hardwood planks. Thick hardboard sheets taped over timber or tiled surfaces prevent permanent gouges when workers roll heavy mechanical lifters across a domestic living room floor. Masonry dust quickly grinds into exposed wood grain if left unguarded beneath heavy work boots. Tape seals prevent grit from creeping underneath. We lay sacrificial timber bearers under steel props to disperse downward loads without cracking ceramic tiles below.

Modern kitchen extension with fitted gray cabinets, island and open dining area

Managing Movement And Settlement

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

Expected Plaster Cracks

Masonry settles onto steel pads. When placing an Rsj across Crawley properties, slight hairline cracks can naturally appear along upstairs skirting boards or ceiling junctions as the weight transfers from jacks onto the permanent steel. Padstones absorb immense downward pressure. You must wait for natural movement to settle before skimming over hair cracks.

Checking Door Clearances

Upper doors can bind slightly. When structural loads transfer onto new lintels, upstairs timber door frames occasionally shift a fraction of an inch as joists adjust their position. Planing the bottom edge of a sticky bedroom door is a common adjustment after steel takes full weight. You should test every latch upstairs once props come down. A quick trim with a hand planer restores an easy swing.

Long Term Padstone Care

Cast concrete blocks stay hidden. Concrete padstones distribute beam point loads into existing perimeter brickwork, meaning you should never drill into them to hang heavy floating shelves or curtain rails. Piercing that concrete weakens bearing strength. Chasing out brickwork directly beneath the steel bearing risks shifting the entire supporting pier. Any future masonry work must stay well clear of the load-bearing masonry below.

Discuss Your Structural Needs with Us

Executed Correctly from the Start

Considering plans for ground floor alterations, the removal of a load-bearing wall, or the addition of a new extension, RSV installation is a crucial step that we approach meticulously. Each RSJ we fit is carefully sized and specified by the structural engineer’s calculations prior to placing any temporary supports. We undertake the installation with full prop support during all stages, ensuring the upper structure is adequately supported.

One Team, Zero Delays

As our team manages the structural work along with the rest of the project, you will not face delays waiting for a separate steel contractor. We oversee the entire RSJ installation, arrange the building control approval, and finish all surrounding areas once the beam is accepted. With decades of expertise backing us, we understand precisely what is needed to execute structural work properly and maintain the momentum of your entire project.

Local contact

Contact in Crawley

We operate locally in Crawley, serving the surrounding areas. Reach out for a free estimate by phone or to arrange a site visit.

approx. 10 milesDistance from our base · Haywards Heath

Call us+44 7351 026409Email usmorespacesussex@yahoo.com

We serve your areaCrawley and the surroundings

The Google map loads after you accept marketing cookies.

Request Your Free Consultation

What Clients Say

01

“Very satisfied with the service! Excellent communication, clean workmanship, and everything completed professionally. Highly recommended!”

Maksymilian Mazur

Review from Google

What we build

Our Building Services

Project Results

Builders at MoreSpace Sussex Ltd deliver finished, practical living spaces tailored to each client's real needs.

Where We Operate

Builders from MoreSpace Sussex Ltd operate within a 40 km radius of Haywards Heath for all projects, from loft conversions and extensions to complete new builds.

Frequently asked questions - Rsj