Extensions · Loft conversions · New builds

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

MoreSpace Sussex Ltd

Rsj in Hove

We supply and install RSJs for structural engineer's calculations in Hove, including full building control sign-off to ensure compliance.

  • On-time, on-budget delivery
  • Clear communication and a fast response
  • One contractor from groundworks to the keys

See our work in person Visit a finished project and talk to past clients

Request Your Free Consultation

Who Needs Structural Steel Work

Opening Up Ground Floor

If you’re looking to knock through a load-bearing wall to create an open-plan kitchen and living area, an RSJ is essential to make that structurally sound in Hove. Removing a load-bearing wall without proper steel support isn't approved by Building Control for valid reasons. That wall is performing a crucial role. An RSJ takes on that responsibility, carrying the weight of the floor or roof above across the new opening. We size and install the beam accurately, following the structural engineer's calculations, so you can be confident that the job is done correctly from the beginning.

Connecting an Extension

When a new extension connects to an existing house in Hove, the junction often requires an RSJ to span the opening and properly tie both parts of the building together. This is particularly common in single-storey rear and side-return extensions where the old rear wall gets partially or fully removed. The RSJ carries the weight above while allowing the new space to flourish below, with the entire connection approved by Building Control before anything gets covered up. Getting this step right prevents future cracks and movement.

Loft and Upper Floor Work

Installing an RSJ is also a typical requirement in many loft conversions in Hove, where structural steel supports new floor joists and redistributes roof loads effectively. During a hip-to-gable or dormer conversion, the existing roof structure is altered significantly, often necessitating an RSJ or steel frame to safely manage the new loads. We adhere to the structural engineer's specifications throughout, using temporary propping during the beam fitting process, while managing Building Control inspections at critical stages. Though the RSJ remains hidden after completion, the structural integrity it provides is fundamental to the entire conversion.

Modern kitchen extension with fitted gray cabinets, island and open dining area

What RSJ Installation Covers

Kitchen extension with modern open-plan design, dark island, dining table, and sliding glass doors to garden

Structural Steel Supply

Our RSJ installation covers both the supply and fitting of rolled steel joists throughout Hove, wherever a load-bearing wall needs removal or a new opening is made. Every RSJ we fit is sized precisely to the structural engineer’s calculations, ensuring that the beam carries exactly what’s required - there’s no room for guesswork or shortcuts. We manage temporary propping throughout the work to maintain structural safety while the RSJ is placed, and building control sign-off comes as standard before covering any work.

Making Good Afterwards

After the RSJ is placed and inspected, we finish all making good as part of the same job. This includes patching, plastering, and integrating the surrounding area so that the work blends seamlessly with the rest of the build. There’s no passing you off to another team, which means no gaps between the structural work and the finishing touches. Whether the RSJ is linking a new extension to your existing home or opening up the ground floor into a single, expansive space, we manage the complete process from start to finish.

Advantages of One Team Throughout

  • No Coordination Gaps

    Working with the same team for the RSJ installation and subsequent building tasks means nothing falls through the cracks. The structural work flows directly into the following stages without waiting for a different contractor to wrap up their part.

  • Structural Work in Context

    Our team understands how the RSJ integrates into the broader project, whether it's a house extension, a loft conversion, or opening up the ground floor. This means the beam is placed correctly from the start, with subsequent building work planned around it.

  • Building Control Handled

    Installing an RSJ requires approval from Building Control before the beam gets covered, and we take care of that aspect as part of the job. You won’t have to muddle through who’s responsible for managing the inspection or what adjustments might be needed.

  • Temporary Propping Done Right

    Proper temporary propping is crucial during the RSJ installation, as getting it wrong jeopardizes the structure. Since we manage the entire sequence of work, the propping remains in place just as long as necessary, with no urge to rush from other trades waiting to move in.

  • Making Good Included

    Once the RSJ is signed off, our team handles any wall openings, plasterwork, and finishes. You won’t be left with a solid beam but a rough finish that someone else has to deal with.

Rendered single-storey extension with large black-framed windows, soffit downlights and a landscaped patio

Preparing Your Living Space Early

Modern kitchen extension with open-plan dining, black cabinetry, and garden doors

Clearing Out The Ground

Dust travels everywhere. When carrying an Rsj in Hove through a narrow Victorian hallway, any console table or wall mirror risks damage as the crew maneuvers the heavy metal flank. You must strip pictures from adjacent walls, cover upholstery with thick decorators canvas, and roll back hallway carpets before any masonry hammer strikes brickwork. A bare access track saves skirting boards from gouges and scratches.

Isolating Kitchen And Ceiling Services

Live wires hide within cavity skins. Trades often uncover unexpected radiator copper pipes or dangling consumer unit cables precisely where the padstone needs to rest flush against the party brickwork. Plumbers and electricians should isolate local supply feeds prior to delivery morning so steel erectors work without sudden surprises or utility shutdowns. An unisolated mains pipe halts your masonry cut instantly, keeping scaffolders idle while waiting for an emergency valve shutoff.

Process From Calculations to Completion

  1. Structural Engineer Calculations

    From the beginning, we partner with a structural engineer to determine the precise RSJ size, specifications, and bearing positions based on the actual span and load requirements for your project.

  2. Temporary Propping Installed

    Before touching any masonry, we set up temporary propping to safely manage the load throughout the work process. This safeguards the structure above and maintains site safety while we proceed with the RSJ installation.

  3. Opening Up and Beam Placement

    We carefully take out the masonry to create the new opening and then lift and position the RSJ onto its padstones or steel columns at each end. The beam is aligned precisely according to the engineer's drawings, with no shortcuts regarding bearing lengths or levels.

  4. Building Control Inspection

    We arrange the Building Control inspection at the structural stage, before anything is sealed off or plastered. The RSJ and its supports get signed off on site, giving you documented confirmation that the work is in line with Building Regulations.

  5. Making Good and Finishing

    Once the RSJ receives sign-off, we restore the surrounding masonry, plasterwork, and relevant finishes. The structural steel integrates into the building’s framework, and the space is returned ready for the next construction phase.

Handling Existing Building Services Below Steel

Routing Gas Flues

Hidden conduits cause structural clashes. If you fit an Rsj in Hove under a first-floor bathroom, a bulky soil stack or boiler exhaust flue might already occupy that precise ceiling void. Cutting holes through flanges is unacceptable, which means you must re-route plumbing drops beneath the lower flange or box them into adjacent stud partitions instead. Copper gas supplies require careful offsets around bearing plates.

Ventilation Around Cold Ironwork

Warm moisture condenses on cold steel. Bare metal attracts moisture beads rapidly in autumn, causing damp patches across new plasterboard if your cross-ventilation or foil-backed foam insulation wraps are left off by careless fitters. We wrap every exposed web in dense insulated jacket membranes before closing the joist pockets, preventing dripping water from rotting your adjacent timber floor joists. Unchecked ceiling sweat rusts fixings and turns pale emulsioned ceiling borders into yellow moisture spots.

Contemporary kitchen extension with dark cabinetry, white counters, and full-width patio doors opening to garden

Avoiding Common Pitfalls On Site

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

Sizing Padstones Correctly

Brick crushing ruins stable party walls. Ordinary breeze blocks will crumble into powdery dust under a concentrated overhead load if contractors place an Rsj in Hove on soft aerated masonry instead of casting dense precast concrete pads. Weight disperses downward through cured concrete beds. Skipping cast pads means interior doorways buckle, binding floorboards beneath upstairs bedrooms.

Ordering The Right Delivery Gear

Long steels cannot negotiate hairpin garden turns. If a supplier drops off an enormous girder on the front pavement, lifting it over boundary hedges requires mechanical Genie hoists rather than pure human muscle. Attempting manual carry risks back injuries or shattered paving flags when the weight slips off greasy gloves. The site approach demands realistic staging plans, especially when access paths turn sharply between neighbouring fence posts.

Checking Timber Floor Heights

Uneven landings create nasty trip hazards. If a new flange projects half an inch higher than the original softwood pine joists, the subfloor plywood rocks whenever footsteps tread across the newly created thresholds. Joiners must plane timber packing strips or notch existing timbers carefully to maintain a continuous, dead-level walking surface throughout the layout. Uneven subfloors snap expensive interlocking floor tiles soon after the painters depart.

Let's Talk About Your Structural Project

Done Right From the Start

If you’re planning to extend your ground floor, remove a load-bearing wall, or connect a new extension to your existing property in Hove, RSJ installation is not an area to compromise. Each RSJ we fit is sized and specified to a structural engineer's calculations before we even put up a single prop. Full temporary propping is in place throughout our work, ensuring that the structure above is adequately supported at every stage.

One Team, No Gaps

With us handling both the structural work and other aspects of the build, there’s no waiting for a separate steel contractor to arrive before the project can proceed. We manage RSJ installation, coordinate Building Control inspections, and ensure all surrounding fabric is made good once the beam is approved. With decades of experience behind us, we know precisely what it takes to get the structural work right and keep the project on track.

Local contact

Contact in Hove

We operate in Hove and the surrounding area, offering reliable RSJ installation. Reach out by phone for a free quote, or we can visit your site to assess your needs, just a 15-mile drive from Haywards Heath.

approx. 15 milesDistance from our base · Haywards Heath

Call us+44 7351 026409Email usmorespacesussex@yahoo.com

We serve your areaHove and the surroundings

The Google map loads after you accept marketing cookies.

Request Your Free Consultation

What Clients Say

01

“Very satisfied with the service! Excellent communication, clean workmanship, and everything completed professionally. Highly recommended!”

Maksymilian Mazur

Review from Google

What we build

Our Building Services

Project Results

Builders at MoreSpace Sussex Ltd deliver finished, practical living spaces tailored to each client's real needs.

Where We Operate

Builders from MoreSpace Sussex Ltd operate within a 40 km radius of Haywards Heath for all projects, from loft conversions and extensions to complete new builds.

Frequently asked questions - Rsj