Extensions · Loft conversions · New builds

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

MoreSpace Sussex Ltd

Rsj in Brighton

We supply and install RSJs in Brighton according to structural engineer's calculations, ensuring full compliance with building control requirements.

  • On-time, on-budget delivery
  • Clear communication and a fast response
  • One contractor from groundworks to the keys

See our work in person Visit a finished project and talk to past clients

Request Your Free Consultation

Who Needs Structural Steel Work

Opening Up Ground Floor

If you're looking to combine a load-bearing wall into an open-plan kitchen and living area, an RSJ in Brighton makes it structurally sound. Removing a crucial wall without the necessary steel support is not something Building Control will allow, understandably so - that wall has an important role. An RSJ takes over, effectively managing the weight of the floor or roof above where the new opening is created. We size and install the beam according to the structural engineer's calculations to ensure everything is correct from the beginning.

Connecting an Extension

When a new extension links to an existing house in Brighton, the connect between the two can often require an RSJ to bridge the gap and properly tie them together. This frequently occurs with single-storey rear and side return extensions, where the original back wall is either partially or completely removed. The RSJ supports the load above, while the newly opened space sits beneath, firmly signed off by Building Control before any finishing touches. Getting this connection right prevents issues like cracking and movement later on.

Loft and Upper Floor Work

Installing RSJs is a standard part of various loft conversions in Brighton, where structural steel is essential for supporting new floor joists and redistributing roof loads. Whether it's a hip-to-gable or dormer conversion, significant adjustments to the existing roof structure usually mean an RSJ or steel frame is necessary to safely manage new loads. Throughout the process, we follow the structural engineer's specifications, propping temporarily while the beam is installed and ensuring that Building Control carries out inspections at the right times. Once completed, the RSJ remains out of sight, but its structural integrity is vital for the whole conversion.

Contemporary kitchen extension with dark cabinetry, white counters, and full-width patio doors opening to garden

Preparing Your Living Space

Modern kitchen extension with fitted gray cabinets, island and open dining area

Clearing Work Areas

Dust travels far. You need to clear kitchenware, pack ornaments into cardboard crates, and roll up hallway carpets before heavy steel enters the hallway. When fitting an RSJ in Brighton homes, tight narrow staircases make shifting bulky furniture away from shared party walls absolutely essential so our crew can walk freely without knocking plasterwork.

Protecting Existing Utilities

Pipes hide inside cavities. Copper water runs or modern grey plastic heating pipes frequently sit directly beneath floorboards right where bearing padstones must rest. Electricians must isolate circuits before anyone cuts masonry, rerouting stray cables sideways so an RSJ never pinches live feeds against solid brickwork. If an old cast iron soil stack drops right through your intended opening, plumbers have to divert the waste run outside into an external hopper first.

Advantages of One Team Throughout

  • No Coordination Gaps

    When the same crew installs the RSJ and continues with the rest of the build, nothing is overlooked. The structural work blends seamlessly into the following stages without needing to wait on an outside contractor.

  • Structural Work in Context

    Our team understands how each RSJ integrates into the larger project, whether it's a house extension, loft conversion, or clearing out the ground floor. This knowledge ensures the beam is positioned accurately from the start and the rest of the build is planned effectively around it.

  • Building Control Handled

    Installing an RSJ requires building control's approval before the beam is concealed, and we manage this process as part of the job. You won't have any confusion about who arranges the inspection or what steps are taken if adjustments are necessary.

  • Temporary Propping Done Right

    Proper temporary propping is crucial during RSJ installation, and errors here can jeopardize the structure. Since we handle all aspects of the task, the propping remains stable for only as long as needed, with no pressure from another contractor wanting to push ahead.

  • Making Good Included

    Once the RSJ installation is complete and signed off, our team will fix the wall openings, plasterwork, and any finishings necessary. You won't be left with just a solid beam and a rough patch that needs sorting by someone else.

Rendered single-storey extension with large black-framed windows, soffit downlights and a landscaped patio

Structural Problems We Solve Properly

Kitchen extension with modern open-plan design, dark island, dining table, and sliding glass doors to garden

Opening Up Load-Bearing Walls

When you break down a ground-floor wall to connect it to an extension or to create a spacious open-plan living area, an RSJ is essential for carrying the load overhead. Each RSJ we fit is expertly sized to a structural engineer's specifications, with proper temporary propping installed during the work to maintain safety. Building Control inspects the RSJ prior to any covering, ensuring there are no uncertainties about what is concealed behind the plaster.

Connecting Extensions to Existing Structure

Attaching a new extension to the original home nearly always requires structural steelwork, and correctly managing that relationship is key to ensuring lasting performance of the build. We meticulously oversee each step - propping, RSJ installation, and restoring the surrounding masonry and finishes - guaranteeing a sound and clean transition between old and new construction. With 35 years of experience with house extensions and structural alterations around Sussex, we know how to properly execute these junctions and deliver according to expectations.

Process From Calculations to Completion

  1. Structural Engineer Calculations

    From the start, we collaborate with a structural engineer to determine the correct RSJ size, specifications, and bearing points based on your project's specific spans and load demands.

  2. Temporary Propping Installed

    Before any masonry work begins, we set up temporary propping to safely manage loads throughout the process. This protects the upper structure while the RSJ installation takes place.

  3. Opening Up and Beam Placement

    We carefully cut the masonry to create the designated opening, then lift and position the RSJ onto padstones or steel columns at both ends. The beam is set according to the engineer's blueprints, maintaining exact bearing lengths and levels.

  4. Building Control Inspection

    We coordinate the Building Control inspection at the structural phase, prior to any boxing or plastering. The site receives sign-off on the RSJ and its supports, ensuring you have a documented record that the work adheres to Building Regulations.

  5. Making Good and Finishing

    After the RSJ has been signed off, we restore the surrounding masonry, plastering, and any affected finishes. The steel structure becomes part of the building, and the area is readied for the next phase of the job.

Fitting Into Coastal Property Layouts

Managing Period Brickwork

Lime mortar stays softer than modern cement, so older brick piers often compress slightly when taking fresh point loads from an RSJ in Brighton terraces. We examine crumbly masonry courses beside chimney breasts thoroughly, setting precast concrete lintels or dense engineering blocks beneath the beam flange to spread weight across multiple wall layers rather than trusting old sandy joints alone.

Accommodating Concealed Structural Drops

Steel beams take depth. While homeowners often picture completely flush ceilings between dining areas and cooking zones, floor joists sitting higher up sometimes dictate that an RSJ must drop beneath the plaster line. Wrapping that exposed lower flange in double-layered fireboard creates an unavoidable boxed beam feature across the room, which requires careful planning around tall kitchen wall cabinets so cupboard doors do not strike the downstand.

Modern kitchen extension with open-plan dining, black cabinetry, and garden doors

Navigating Party Wall Agreements

Contemporary kitchen extension with island unit, built-in storage, and open-plan living area featuring modern cabinetry and skylights

Serving Proper Notices

Neighbours need early warning. Cutting beam pockets into shared walls requires formal notices delivered well before trades turn up on site. For an RSJ in Brighton, terraced houses share party structures, meaning your neighbour has every right to request an independent surveyor check beam bearing depths inside their hallway before steel lifts proceed.

Scheduling Structural Work Sensibly

Do not rush notifications. Waiting for written consent prevents disputes after walls are already opened up. When adjoining owners request condition schedules, a surveyor photographs hairline cracks in their stairwell beforehand, proving our new RSJ installation caused zero movement next door when masonry chisels start vibrating shared brickwork.

Avoiding Common Paperwork Delays

Vague drawings stall building approvals. Submitting engineer calculations that lack padstone dimensions or omit exact flange weights forces surveyors to reject applications, leaving skips parked on the driveway while teams wait for revised paperwork. Clarifying steel grades with building officers early prevents delays on site.

Let's Talk About Your Structural Project

Done Right From the Start

If you intend to open up a ground floor, remove a load-bearing wall, or connect a new extension to your house, RSJ installation is not a task to take lightly. Each RSJ we install is sized and specified to structural engineer calculations before any propping takes place. Throughout the process, full temporary propping keeps the overhead structure supported at every stage.

One Team, No Gaps

Since we manage the structural work alongside the entire build, there's no waiting for a separate steel contractor to arrive before moving forward. We orchestrate the RSJ installation, facilitate the building control inspection, and smooth out all adjacent surfaces once the beam is approved. With 35 years of expertise backing us, we know what it takes to complete the structural work effectively and keep everything moving.

Local contact

Contact in Brighton

We work in Brighton and the surrounding area, including Hove and Shoreham-by-Sea. Contact us for a free estimate or a visit on site.

approx. 15 milesDistance from our base · Haywards Heath

Call us+44 7351 026409Email usmorespacesussex@yahoo.com

We serve your areaBrighton and the surroundings

The Google map loads after you accept marketing cookies.

Request Your Free Consultation

What Clients Say

01

“Very satisfied with the service! Excellent communication, clean workmanship, and everything completed professionally. Highly recommended!”

Maksymilian Mazur

Review from Google

What we build

Our Building Services

Project Results

Builders at MoreSpace Sussex Ltd deliver finished, practical living spaces tailored to each client's real needs.

Where We Operate

Builders from MoreSpace Sussex Ltd operate within a 40 km radius of Haywards Heath for all projects, from loft conversions and extensions to complete new builds.

Frequently asked questions - Rsj